[2022] Pass 1Y0-241 Exam - Real Questions & Answers
1Y0-241 Exam Questions Get Updated [2022] with Correct Answers
NEW QUESTION 12
Scenario: After deploying a Citrix ADC in production, a Citrix Administrator notices that client requests are NOT being evenly distributed among backend resources. The administrator wants to change from the default loadbalancing method to one that will help distribute the load more evenly.
Which load-balancing method would ensure that the server with the least amount of network utilization is receiving new connections?
- A. Least bandwidth
- B. Least response time
- C. Least packets
- D. Least connection
Answer: D
NEW QUESTION 13
Which Citrix ADC Access Control List (ACL) command can a Citrix Administrator use to bridge traffic originating from the IP address 192.168.10.200?
- A. add ns simpleacl
- B. add ns acl6
- C. add ns acl
- D. add ns simpleacl6
Answer: C
NEW QUESTION 14
Scenario: The primary content switching vServer has gone down. To troubleshoot, a Citrix Administrator has issued the following command:
> show csvserver CSV
CSV (10.1.100.100:443) - HTTPS Type: CONTENT
State: UP
Last state change was at Mon Jun 29 15:20:43 2020
Time since last state change: 1 day, 06:47:58 610
Client Idle Timeout: 180 sec
Down state flush: ENABLED
Disable Primary vServer On Down: DISABLED
Appflow logging: ENABLED
Port Rewrite: DISABLED
State Update: DISABLED
Default: Content Precedence: URL
vServer IP and Port insertion: OFF
Persistence: NONE redirect: http://www.site1.com/mysite1/maintenance
Backup: vServer-LB-2
Listen Policy: NONE
IcmpResponse: PASSIVE
RHIstate: PASSIVE
Traffic Domain: 0
Based on this output, where will the subsequent request be redirected?
- A. Backup content switching vServer
- B. 10.1.100.100:443
- C. http://www.site1.com/mysite1/maintenance
- D. vServer-LB-2
Answer: C
NEW QUESTION 15
A Citrix Administrator needs to use a client's IP address as the source IP address for Citrix ADC-to-server connections.
Which Citrix ADC mode can the administrator use to meet this requirement?
- A. USIP
- B. USNIP
- C. Layer 3
- D. Layer 2
Answer: A
NEW QUESTION 16
Which mode does a Citrix Administrator need to configure to allow a Citrix ADC to control the packetforwarding function based on the route table lookups?
- A. USIP
- B. Layer 3
- C. Layer 2
- D. MBF
Answer: B
NEW QUESTION 17
Scenario: The Citrix Administrator of a Linux environment needs to load balance the web servers. Due to budget constraints, the administrator is NOT able to implement a full-scale solution.
What can the administrator purchase and install to load balance the webservers?
- A. Citrix ADC CPX
- B. Citrix ADC MPX
- C. Citrix ADC SDX
- D. Citrix ADC VPX
Answer: A
NEW QUESTION 18
What
is the effect of the "set cs vServer-CS-1 -redirectURL http://www.newdomain.com/mysite/" command?
- A. If
the status of vServer-CS-1 is DOWN, then users will be redirected to http://www.newdomain
.com/mysite/. - B. If
the vServer-CS-1 encounters a high connection rate, then users will be redirected to
http://www.newdomain.com/mysite/. - C. All the requests without URL path/mysite/ will be redirected to http://www.newdomain.com/mysite/.
- D. All
the requests to vServer-CS-1 will be redirected to http://www.newdomain.com/mysite/.
Answer: A
NEW QUESTION 19
Scenario: A Citrix Administrator needs to improve website loading speed. End users are reporting slow GIF image rendering speeds as they scroll down a website, which affects overall page load time.
Which Citrix ADC feature can the administrator enable to improve website performance?
- A. Image optimization
- B. Domain sharding
- C. Image lazy loading
- D. Image shrink-to attributes
Answer: A
Explanation:
Explanation
NEW QUESTION 20
A Citrix Administrator needs to configure a Citrix ADC high availability (HA) pair with each Citrix ADC in a different subnet.
What does the administrator need to do for HA to work in different subnets?
- A. Configure SyncVlan
- B. Turn on HA monitoring on all interfaces
- C. Turn on Independent Network Configuration (INC) mode.
- D. Turn on fail-safe mode.
Answer: C
NEW QUESTION 21
Scenario: A Citrix Administrator made changes to a Citrix ADC, deleting parts of the configuration and saving some new ones. The changes caused an outage that needs to be resolved as quickly as possible. There is no Citrix ADC backup.
What does the administrator need to do to recover the configuration quickly?
- A. Run saved versus running configuration.
- B. Restart the Citrix ADC.
- C. Run highly availability (HA) file synchronization.
- D. Restore from the revision history.
Answer: D
NEW QUESTION 22
Scenario: A Citrix Administrator manages an environment that has three SSL websites, all serving the same content.
www.company.com
www.company.net
www.company.org
The administrator would like to consolidate the websites into a single, load-balanced SSL vServer.
What can the administrator bind to use a single SSL vServer?
- A. A wildcard certificate to a single SSL vServer
- B. A multiple SAN certificate to a single SSL vServer
- C. The certificate of each website to a single SSL vServer
- D. A wildcard certificate to a content-switching vServer
Answer: C
NEW QUESTION 23
Scenario: A Citrix Administrator configured a global server load balancing (GSLB) setup for internal and external users using the same host name. For internal users, cvad.citrite.net should go to the Citrix StoreFront site; for external users, it should connect to the Citrix ADC Gateway VPN site.
Which feature should the administrator configure to accomplish this?
- A. DNS Proxy
- B. DNS View
- C. DNS Preferred Location
- D. DNS Record
Answer: B
NEW QUESTION 24
Which Citrix ADC monitor can a Citrix Administrator use to check the authentication service of the Active Directory (AD) domain controller?
- A. A ping monitor with the IP address of the AD domain controller in the special parameters
- B. A MYSQL-ECV monitor with the Base DN, Bind DN, Filter, Attribute, and Password parameters configured in the basic parameters
- C. An LDAP monitor with the LDAP Script Name, Configured Base DN, Bind DN, Filter, Attribute and Password parameters in the basic parameters.
- D. A TCP monitor with the LDAP Base DN configured in the basic parameters.
Answer: C
NEW QUESTION 25
Scenario: The policies below are bound to a content switching vServer.
bind cs vServer vserver1 -policyName CSPOL_7 -priority 100 -gotoPriorityExpression NEXT bind cs vServer vserver1 -policyName CSPOL_5 -priority 90 bind cs vServer vserver1 -policyName CSPOL_9 -priority 110 bind cs vServer vserver1 -policyName CSPOL_4 -priority 120 bind cs vServer vserver1 -policyName CSPOL_8 -priority 210 Policy CSPOL_7 has been invoked.
Which policy will be invoked next?
- A. CSPOL_8
- B. CSPOL_4
- C. CSPOL_9
- D. CSPOL_5
Answer: D
NEW QUESTION 26
Scenario: While using the GUI, a Citrix ADC MPX appliance becomes unresponsive. A Citrix Administrator needs to restart the appliance and force a core dump for analysis.
What can the administrator do to accomplish this?
- A. Use the reset button on the front of the appliance.
- B. Use the NMI button on the back of the appliance.
- C. Connect to a USB port to issue a restart command.
- D. Turn off the appliance using the power button.
Answer: B
NEW QUESTION 27
A Citrix Administrator receives user complaints about latency while accessing an application that is load balanced on the Citrix ADC.
Which tool can the administrator use to gather information regarding response time, client network latency, and server-side processing time?
- A. WAN Insight
- B. HDX Insight
- C. Citrix Application Delivery Management (ADM)
- D. Security Insight
Answer: B
NEW QUESTION 28
Scenario: Client connections to certain vServers are abnormally high. A Citrix Administrator needs to be alerted whenever the connections pass a certain threshold.
How can the administrator use Citrix Application Delivery Management (ADM) to accomplish this?
- A. Configure SMTP reporting on the Citrix ADM by adding the threshold and email address.
- B. Configure specific alerts for vServers using Citrix ADM.
- C. Configure network reporting on the Citrix ADM by setting the threshold and email address.
- D. Configure TCP Insight on the Citrix ADM.
Answer: C
NEW QUESTION 29
Scenario: While attempting to access web server that is load balanced by a Citrix ADC using HTTPS, a user receives the message below.
SSL/TLS error: You have not chosen to trust "Certificate Authority" the issuer of the server's security certificate.
What can a Citrix Administrator do to prevent users from viewing this message?
- A. Ensure that users have the server certificate installed.
- B. Ensure that users have the certificate's private key.
- C. Ensure that users have the certificate's public key.
- D. Ensure that the server certificate is linked to its respective intermediate and root certificates.
Answer: C
NEW QUESTION 30
Which two steps are necessary to configure global server load balancing (GSLB) service selection using content switching (CS)? (Choose two.)
- A. Configure a CS vServer of target type GSLB.
- B. Bind the domain to the CS vServer instead of the GSLB vServer.
- C. Configure CS policies that designate a load-balancing vServer as the target vServer.
- D. Bind the GSLB domain to the GSLB vServer.
Answer: A,C
NEW QUESTION 31
Scenario: A Citrix Administrator manages an environment that has a Citrix ADC high availability (HA) pair running on two MPX appliances. The administrator notices that the state of the secondary Citrix ADC is
'Unknown'.
What is causing the secondary state to be 'Unknown'?
- A. The administrator made both Citrix ADCs primary.
- B. The remote procedure call (RPC) nodes are incorrectly configured.
- C. The synchronization on the secondary appliance is disabled.
- D. TCP port 22 is disabled between the primary and secondary ADCs.
Answer: B
NEW QUESTION 32
......
What is the duration of the Citrix 1Y0-241: Deploy and Manage Citrix ADC 13 with Traffic Management Exam
- Passing score: 61%
- Number of Questions: 64
- Format: Multiple choices, multiple answers
- Length of Examination: 90 minutes
Practice 1Y0-241 Questions With Certification guide Q&A from Training Expert TestkingPass: https://prepaway.testkingpass.com/1Y0-241-testking-dumps.html