Best Way To Study For BCS TTA-19 Exam Brilliant TTA-19 Exam Questions PDF
Updated Verified Pass TTA-19 Exam - Real Questions and Answers
BCS TTA-19 Certification Exam is a valuable certification for individuals and organizations seeking to improve their technical testing capabilities. Candidates must have a solid foundation in software testing and advanced knowledge in technical testing to be eligible for the exam. ISTQB Certified Tester Advanced Level - Technical Test Analyst 2019 certification provides many benefits, including career advancement and improved software quality.
BCS TTA-19 certification exam is a comprehensive exam that covers a wide range of technical testing topics. TTA-19 exam consists of three parts, including a multiple-choice section, a scenario-based section, and a hands-on testing assignment. The multiple-choice section tests your knowledge of technical testing concepts, while the scenario-based section tests your ability to apply those concepts to real-world scenarios. The hands-on testing assignment requires you to use your technical testing skills to test a complex software application.
NEW QUESTION # 33
Which of the following is an important principle for using experienced-based test techniques?
- A. Testers should be evaluated based on the number of defects they find
- B. Testers should always focus on defect-prevention activities
- C. Tester skills are less important than ensuring 100% test utilization
- D. Tester skill is a critical factor in assigning test execution tasks
Answer: D
NEW QUESTION # 34
Which of the following items are characteristics of good testing in any life cycle model?
i. Every development activity has a corresponding test activity
ii. Development documents are reviewed early in the life cycle
iii. There are separate levels for performance and usability testing
iv. Each test level has objectives specific to that level
v. Each test level is based on the same test basis
- A. (ii), (iii) and (v)
- B. (i), (li) and (iv)
- C. (v), (ii) and (iv)
- D. (i), (iv) and (v)
Answer: C
NEW QUESTION # 35
One limitation of pairwise testing is that it ...
- A. finds defects in clusters of functionality
- B. may not produce the most commonly used combinations
- C. produces all combinations of tests
- D. is only suitable for testing boundaries
Answer: B
NEW QUESTION # 36
Using the state model of the component provided earlier, how many test cases are needed to achieve 1-switch coverage?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 37
When preparing for an exploratory test, which of the following sets of artifacts would be the most appropriate to produce?
- A. Charter outlining tasks (tests) to be performed and objectives to be met, plus a set of heuristics to follow
- B. Charter outlining objectives to be met, plus a set of heuristics to follow
- C. Charter outlining tasks (tests) to be performed and objectives to be met, plus a set of heuristics to follow and the completed session sheets
- D. Charter outlining tasks (tests) to be performed and objectives to be met, plus a set of defect types to be targeted and a list of new issues encountered
Answer: A
NEW QUESTION # 38
Which ISO 9126 quality attribute is most likely to always be of importance when testing a web site?
- A. Fault-tolerance
- B. Portability
- C. Recoverability
- D. Maintainability
Answer: B
NEW QUESTION # 39
The use of exploratory testing is also being considered.
Which of the following practices is NOT part of exploratory testing?
- A. Working in pairs
- B. Holding debriefing meetings
- C. Writing detailed test procedures
- D. Writing test charters
Answer: C
NEW QUESTION # 40
To enhance the test design phase the purchase of a test design tool is being considered.
Which statement characterizes best a test design tool?
- A. It enables individual tests to be traced to requirements
- B. It enables tests to be executed automatically
- C. It validates models of the software
- D. It generates test inputs or executable tests from requirements
Answer: D
NEW QUESTION # 41
Analyzing the requirement, there are arguments to be made for several test design techniques.
Which of the following test design techniques is LEAST likely to be used for identifying test cases for the requirement?
- A. Equivalence Partitioning
- B. Classification Tree Method
- C. Boundary value analysis
- D. State Transition Testing
Answer: D
NEW QUESTION # 42
To enhance testing the purchase of a test management tool is being considered.
For which of the following test tasks would a requirements management tool be most useful?
- A. Specifying tests
- B. Providing traceability of tests to requirements
- C. Executing tests
- D. Static testing
Answer: B
NEW QUESTION # 43
Which of the following fits the principles of experience-based testing?
- A. Different people will have a different experience level regarding usability testing
- B. Models can be used to derive the required test cases
- C. Coverage calculations can be used to determine the amount of testing required
- D. Experience in test execution is more important than experience in test design
Answer: D
NEW QUESTION # 44
Which of the following is an example of the use of a defect taxonomy for test design?
- A. Sending the defect taxonomy, along with the frequency of defect occurrence, to development for process improvement
- B. Using the frequency of defect occurrence as an input into product risk analysis
- C. Updating the defect taxonomy after test execution to reflect the latest findings
- D. Selecting test inputs that are likely to reveal a failure associated with a particular defect
Answer: D
NEW QUESTION # 45
Which alternative specification-based test design technique could be used to test the web site and will most likely find very different types of defects?
- A. Equivalence Partitioning
- B. Statement Testing
- C. Decision Table Testing
- D. Use Cases
Answer: D
NEW QUESTION # 46
Scenario "Banking Project"
As a test analyst in the banking domain you have received the following requirement:
"The system shall allow cash advances of at least 200 Euros for all supported credit cards, The correct list of credit cards is American Express, Diners, VISA, Mastercard and Eurocard. For the ATM banking project introduced earlier; "When the user first inserts a valid credit card type, the system considers the user to be in an unauthenticated state. When requesting a cash advance, the user must be in an authenticated state. The user authenticates by entering the proper PIN code. When authenticating the user, the system shall allow the user to enter their PlN code up to three times before failing the authentication and rejecting the card. On the first and second try, the system shall prompt the user to re- enter the PIN code." Suppose you are concerned that, depending on the exact number of invalid PIN codes entered, the system might behave improperly.
Which of the following test design techniques is specifically targeted at such failures?
- A. State Transition Testing using 1-switch coverage
- B. Classification Tree Method
- C. Equivalence Partitioning extended by boundary value analysis
- D. Pairwise Testing with orthogonal arrays
Answer: A
NEW QUESTION # 47
For the project three completion criteria have been defined.
A) Test cases passed more than 70%
B) Number of outstanding defects less than 0,5
C) Number of defects per test case less than 0,5
The first week of the testing has shown the following results:
Evaluate the status of the project at the end of the week against the defined completion criteria.
Which of the following options shows the correct status?
- A. Criteria A = OK, criteria B = NOT OK, criteria C = NOT OK
- B. Criteria A = NOT OK, criteria B = NOT OK, criteria C = NOT OK
- C. Criteria A = OK, criteria B = OK, criteria C = OK
- D. Criteria A = NOT OK, criteria B = NOT OK, criteria C = OK
Answer: D
NEW QUESTION # 48
Which of the following is a typical defect that boundary value analysis would identify?
- A. Improper handling of sequences of events
- B. Improper handling of combinations of conditions
- C. Improve handling of classes of inputs
- D. Improper handling of large and small values
Answer: D
NEW QUESTION # 49
......
BCS TTA-19 (ISTQB Certified Tester Advanced Level - Technical Test Analyst 2019) exam is a rigorous and challenging certification that validates the technical testing skills of professionals at an advanced level. It is an ideal certification for individuals who want to demonstrate their expertise in this area and advance their careers in the field of software testing.
Updated PDF (New 2024) Actual BCS TTA-19 Exam Questions: https://prepaway.testkingpass.com/TTA-19-testking-dumps.html