C1000-082 Exam Preparation Material with New C1000-082 Dumps Questions
C1000-082 2023 Training With 62 QA's
IBM Spectrum Protect is a data protection platform that provides a single point of control and administration for backup, archive, and recovery of data. The IBM C1000-082 exam, also known as the IBM Spectrum Protect V8.1.9 Administration exam, is designed for IT professionals who are responsible for installing, configuring, and managing IBM Spectrum Protect environments.
NEW QUESTION # 29
How is the mail server information configured for the Operations Center to be able to send reports?
- A. use the SET REPORTSMTPHOST command and restart the Operations Center services
- B. add the SMTPSERVER option in dsmserv.opt
- C. start the Operations Center configuration wizard
- D. click Configure Mail Server in the Reports section
Answer: D
Explanation:
https://www.ibm.com/docs/en/spectrum-protect/8.1.7?topic=solutions-tracking-system-status-by-using-email-reports
NEW QUESTION # 30
Which three processes can be in order to prepare for Disaster Recovery?
- A. node replication
- B. expiration
- C. reclamation
- D. migrate node
- E. protect storage pool
- F. backup storage pool
Answer: A,E,F
Explanation:
According to the IBM Spectrum Protect documentation1, three processes that can be used to prepare for disaster recovery are:
Protect storage pool: This process creates a copy of a primary storage pool on another server or device. The copy can be used to restore data if the primary storage pool is damaged or lost.
Node replication: This process replicates data from one server node to another server node. The replicated data can be used to recover client data if the source server node is unavailable.
Backup storage pool: This process backs up data from a primary storage pool to another storage pool. The backup storage pool can be used to restore data if the primary storage pool is corrupted or deleted.
NEW QUESTION # 31
What are clients at-risk in the Operation Center?
- A. clients that are running low on disk space
- B. clients that are running older clients with security vulnerabilities
- C. clients without successful backup based on the policy
- D. clients that are potentially infected by ransomware
Answer: C
Explanation:
According to IBM documentation1, clients at-risk in the Operation Center are clients without successful backup based on the policy. The Operation Center shows a large number of "At Risk" clients even though backups are completing normally if the number of "At Risk" clients is larger than the number of failed client backups.
https://www.ibm.com/support/pages/operation-center-showing-high-number-risk-clients
NEW QUESTION # 32
What is the default client file to look in for errors in a scheduled client backup?
- A. dsmsched.log
- B. tsmerror.log
- C. schederr.log
- D. dsmerr.log
Answer: A
Explanation:
According to the IBM Spectrum Protect V8.1.9 documentation, the dsmsched.log file is the default client file that contains error logs for scheduled client backups. This file is located in the directory where the Spectrum Protect client is installed.
The dsmsched.log file contains detailed information about scheduled client backups, including any error messages that may have occurred during the backup. This file is a useful tool for troubleshooting issues with client backups.
https://www.ibm.com/support/pages/collecting-data-ibm-spectrum-protect-client-backup-and-restore
NEW QUESTION # 33
What is a use case for setting up Web client service?
- A. remote management of a client node from the Operations Center
- B. installation of client code updates directly from the web
- C. backup of NAS servers via Web client GUI
- D. node configuration via Web client GUI
Answer: A
Explanation:
According to IBM Spectrum Protect V8.1.9 documentation1, web client service is a feature that allows users to restore files from backup versions by using a web browser. The web client service runs on a backup-archive client node and communicates with the IBM Spectrum Protect server.
A use case for setting up web client service is to enable remote management of a client node from the Operations Center2. The Operations Center is a web-based interface that provides centralized management of IBM Spectrum Protect servers and clients. By using the Operations Center, you can view information about backup-archive clients that have web client service enabled, and you can launch the web client interface to restore files on those clients.
https://www.ibm.com/support/pages/ibm-spectrum-protect-version-819-clients
NEW QUESTION # 34
Which command defines or deletes all drives and their paths for a single library in one step?
- A. AUDIT LIBRARY with AUTODISCOVERY=ON
- B. DEFINE DRIVE with AUTODETECT=ON
- C. DEFINE LIBRARY with SANDISCOVERY=ON
- D. PERFORM LIBACTION with SANDISCOVERY=ON
Answer: D
Explanation:
According to the IBM Spectrum Protect documentation1, one command that defines or deletes all drives and their paths for a single library in one step is PERFORM LIBACTION with SANDISCOVERY=ON. This command performs a SAN discovery operation on a SCSI or VTL library and automatically defines or deletes all drives and paths that are associated with the library.
https://www.ibm.com/docs/en/spectrum-protect/8.1.7?topic=commands-define-drive-define-drive-library
NEW QUESTION # 35
What happens by default if the journal engine service is installed and running when the incremental command is used for a backup?
- A. It updates the journal database with current data after a successful backup.
- B. It monitors the incremental backup process and collects all data that is eligible for the next journal-based full backup.
- C. It performs a journal-based backup on file systems that are being monitored by the journal engine service.
- D. It backs up the file journal on an incremental basis.
Answer: C
Explanation:
The journal engine service monitors changes to specified files and directories and records information about the changes in a journal database. When a backup is performed on a file system that is being monitored by the journal engine service, IBM Spectrum Protect uses the information in the journal database to perform a journal-based backup. This allows IBM Spectrum Protect to quickly identify and back up only the files that have changed since the last backup, reducing the amount of data that needs to be backed up and speeding up the backup process.
According to IBM Spectrum Protect V8.1.9 documentation1, journal-based backup is an alternate method of backup that uses a change journal maintained by the IBM Spectrum Protect journal service process. To support journal-based backup, you must configure the journal engine service using the dsmcutil command or the client GUI setup wizard.
The incremental command backs up all new or changed data in the locations that you specify, unless you exclude them from backup services2. If the journal engine service is installed and running when the incremental command is used for a backup, it performs a journal-based backup on file systems that are being monitored by the journal engine service1.
NEW QUESTION # 36
What is the purpose of the set REPLSERVER command?
- A. It sets the local server to be a source replication server.
- B. It sets the local server to be a target replication server.
- C. It sets the name of a source replication server.
- D. It sets the name of a target replication server.
Answer: D
Explanation:
According to IBM documentation1, the purpose of the SET REPLSERVER command is to set the name of a target replication server for a source replication server. The command has two parameters: SERVERNAME and REPLSERVER. The SERVERNAME parameter is the name of a source replication server that you want to replicate data from. The REPLSERVER parameter is the name of a target replication server that you want to replicate data to.
According to IBM documentation1, the purpose of the SET REPLSERVER command is to set the name of a target replication server for a source replication server. The command has two parameters: SERVERNAME and REPLSERVER. The SERVERNAME parameter is the name of a source replication server that you want to replicate data from. The REPLSERVER parameter is the name of a target replication server that you want to replicate data to.
https://www.ibm.com/docs/en/spectrum-protect/8.1.9?topic=servers-whats-new
NEW QUESTION # 37
What should be included with Disaster Recovery media managed by Disaster Recovery Manager (DRM)?
- A. server password file backup
- B. directory containers
- C. database backup
- D. cloud containers
Answer: C
Explanation:
https://www.ibm.com/docs/SSEQVQ_8.1.9/srv.solutions/b_srv_concepts_guide.pdf
NEW QUESTION # 38
Which three parameters are required to set server-to-server communication?
- A. high level address
- B. server certificate
- C. admin name
- D. server password
- E. low level address
- F. admin password
Answer: A,D,E
Explanation:
According to IBM documentation1, to define a server for server-to-server communications, you need to use the DEFINE SERVER command and specify three parameters: SERVERNAME, HLADDRESS, and LLADDRESS. The SERVERNAME parameter is the name of the server that you are defining. The HLADDRESS parameter is the high-level address of the server that you are defining. The LLADDRESS parameter is the low-level address of the server that you are defining.
NEW QUESTION # 39
What is the purpose of the VALIDATE REPLPOLICY command?
- A. compare the policies on the source and target replication servers
- B. validate which nodes are configured for replication
- C. ensure the policies are replicated from the source to the target replication server
- D. verify the status of replication storage rules
Answer: A
Explanation:
According to the web search results, the best answer is C. compare the policies on the source and target replication servers. This command is used to verify that the policies on the target replication server match those on the source replication server1.
NEW QUESTION # 40
How can an administrator be designated as an approval administrator?
- A. issue the command SET APPROVERSREQUIREAPPROVAL=ALL
- B. update the admin with the CMDAPPROVER=YES option
- C. update the list of the admins in the set COMMANDAPPROVAL command
- D. issue the command GRANT APPROVERSANDMINS=ALL
Answer: A,D
Explanation:
According to IBM's documentation1, server-side deduplication is the process of removing redundant data during a backup operation on the server system. Server-side deduplication is especially effective when you want to conserve disk space on the server storage pools.
To optimize the performance of server-side deduplication, two items that should be examined are:
The storage for the database provides sufficient IOPS. IBM recommends using a high-performance disk for the database and ensuring that it has a minimum capability of 3000 IOPS1.
The server has sufficient memory. IBM recommends allocating at least 1 GB of memory for each TB of data that is backed up each day2.
NEW QUESTION # 41
Which component is automatically installed and configured during IBM Spectrum Protect installation that collects data to be used by support in case of any problem with the server?
- A. datacollect
- B. servermon
- C. systemview
- D. perfmon
Answer: C
Explanation:
According to IBM Spectrum Protect documentation1, a component that is automatically installed and configured during IBM Spectrum Protect installation that collects data to be used by support in case of any problem with the server is systemview1. Systemview is a tool that collects configuration and performance data from IBM Spectrum Protect servers and clients. It can help diagnose problems and optimize performance. https://www.ibm.com/support/pages/collecting-data-spectrum-protect-v7-server-install-or-upgrade
NEW QUESTION # 42
What do dissimilar policies provide in IBM Spectrum Protect node replication between source and target servers?
- A. differing retention of data
- B. differing administrative client owners
- C. differing prioritization of client replication operations
- D. differing client node names
Answer: A
Explanation:
In IBM Spectrum Protect node replication, dissimilar policies provide the ability to replicate client data between source and target servers with differing retention settings.
Dissimilar policies allow for more granular control over the retention settings of client data on the target server, which can be different from the retention settings on the source server. This means that the data can be kept for a longer or shorter period of time on the target server compared to the source server, based on the specific retention policies configured for the target server.
According to IBM documentation1, dissimilar policies provide the ability to use different management policies on the target replication server than on the source replication server. This means that you can have different retention periods, storage pools, or data types for replicated data on the target server. You can enable this feature by using the SET DISSIMILARPOLICIES command.
https://www.ibm.com/docs/SSEQVQ_8.1.9/srv.reference/r_cmd_dissimilarpolicies_set.html
NEW QUESTION # 43
How can IBM Spectrum Protect recovery log usage be obtained?
- A. QUERY LOG
- B. QUERY DB T=LOG
- C. QUERY DBSPACE
- D. QUERY DBLOG
Answer: D
Explanation:
You can use the QUERY DBLOG command in Spectrum Protect to obtain recovery log usage. This command displays information about the logs that are currently active and the logs that have been archived or deleted. Specifically, the command provides details about the total amount of recovery log space allocated, the amount of space currently used, and the amount of space that is still available for use.
To run this command, you can use the following steps:
Open the Spectrum Protect Administrative Client.
Connect to the Spectrum Protect instance.
In the command line, type q dblog.
Press Enter.
Once you execute the command, you will see the information about the recovery log usage displayed on the screen.
https://www.ibm.com/docs/en/spectrum-protect/8.1.9?topic=utilities-administrative-commands
NEW QUESTION # 44
Which type of client backup can be restored without having access to the server?
- A. journal-based backup
- B. retentionset
- C. backupset
- D. full backup
Answer: C
Explanation:
According to IBM documentation1, a backup set is a collection of your files that reside on the server, onto portable media created on a device using a format that is compatible with the client device. You can restore data from a backup set without having access to the server by using the dsmc restore backupset command1.
https://www.ibm.com/docs/en/spectrum-protect/8.1.12?topic=clients-restoring-your-data
NEW QUESTION # 45
What must be done after defining a storage tiering rule to begin tiering data from directory-container pool to tape?
- A. associate the rule
- B. activate the rule
- C. replicate the rule
- D. execute the rule
Answer: D
Explanation:
According to the IBM Spectrum Protect documentation1, the action that must be done after defining a storage tiering rule to begin tiering data from directory-container pool to tape is C. execute the rule. This action can be done by using the START STGRULE command or by clicking Run Now in the Operations Center1. This action will start processing the storage tiering rule immediately without waiting for its scheduled start time1.
NEW QUESTION # 46
Which command is used to copy data in directory-container storage pools to ta
- A. PROTECT STGPOOL
- B. BACKUP STGPOOL
- C. COPY STGPOOL
- D. REPLICATE STGPOOL
Answer: C
Explanation:
The command used to copy data in directory-container storage pools to tape in IBM Spectrum Protect is the "COPY STGPOOL" command.
According to the IBM documentation, the "COPY STGPOOL" command creates a copy of the data in the specified storage pool on a different storage pool, such as a tape storage pool. This command is typically used to create a backup copy of the data in the storage pool in case the original copy is lost or becomes corrupted.
https://www.ibm.com/docs/en/spectrum-protect/8.1.0?topic=pool-copying-directory-container-storage-pools-tape
NEW QUESTION # 47
Which privilege class can perform all administrative functions?
- A. superuser
- B. system
- C. administrator
- D. root
Answer: B
Explanation:
According to IBM Spectrum Protect V8.1.9 documentation1, a system administrator has the highest level of authority in IBM Spectrum Protect. A system administrator can issue any administrative command and has authority to grant or revoke privileges for other administrators.
The privilege class for a system administrator is SYstem1. The other privilege classes such as root, administrator, or superuser are not valid for IBM Spectrum Protect.
In IBM Spectrum Protect (formerly known as Tivoli Storage Manager), the system privilege class can perform all administrative functions. The system privilege class includes the following permissions:
SYSOP: System operations
AUDIT: Auditing operations
SECURITY: Security operations
NODEADDP: Add nodes
NODEDELP: Delete nodes
MGMTCLAS: Management class operations
DEVCLASS: Device class operations
STGPOOL: Storage pool operations
LIBRARY: Library operations
QUERY: Query operations
BACKUP: Backup and archive operations
RESTORE: Restore operations
ARCHIVE: Archive operations
RESTOREVM: Restore virtual machine operations
PROXY: Proxy operations
NEW QUESTION # 48
Which data is captured in a retention set?
- A. a subset of selected active and inactive data for a particular node or virtual machine
- B. a point-in-time collection of inactive client backup data for a set of nodes or virtual machines
- C. a point-in-time snapshot of all the data in one or more file spaces that was active at the time of the snapshot
- D. copies of all archived objects for a particular node or virtual machine
Answer: B
Explanation:
According to the web search results, a retention set is a point-in-time collection of inactive client backup data for a set of nodes or virtual machines1. A retention set can be used to meet long-term data retention requirements without having to store multiple copies of the data on the server1.
NEW QUESTION # 49
Who can issue the REPAIR STGPOOL command?
- A. any admin who has been designated as an approval administrator
- B. only an admin with Policy privilege class or higher
- C. only an admin with System privilege class
- D. any admin with Storage privilege class or higher who has been designated as an approval administrator
Answer: A
Explanation:
According to IBM documentation1, the REPAIR STGPOOL command is a restricted command that requires authorization from an approval administrator. An approval administrator is an administrative user who has been designated as an approver for restricted commands by using the SET APPROVALADMIN command2.
NEW QUESTION # 50
To specify whether the client acceptor daemon service (CAD) manages the scheduler, add the MANAGEDSERVICES option in which configuration file on Linux?
- A. dsm.sys
- B. backup.config
- C. sched.log
- D. dsmserv.opt
Answer: A
Explanation:
To specify whether the client acceptor daemon service (CAD) manages the scheduler, you need to add the MANAGEDSERVICES option in the client system-options file on Linux1. The client system-options file is named dsm.sys by default1. You can use this option to reduce the number of background processes on your workstation by letting the client acceptor daemon start and stop the scheduler process as needed for each scheduled action23.
NEW QUESTION # 51
Which information might indicate that a cyber attack has occurred for a particular node?
- A. node is marked inactive for next backup schedule
- B. lock the filespace for the specific node
- C. deduplication ratio increases for that node
- D. increase in data ingest total for that node
Answer: D
Explanation:
According to the IBM Documentation1, one possible indication that a cyber attack has occurred for a particular node is an increase in data ingest total for that node. This means that the amount of data that is transferred from the client node to the server during backup operations has increased significantly, which could be a sign of ransomware or other malicious software modifying or encrypting files on the node.
NEW QUESTION # 52
Which command is used to change the number of versions of backups to keep?
- A. UPDATE RETRULE
- B. UPDATE NUMVERSION
- C. UPDATE COPYGROUP
- D. UPDATE MGMTCLASS
Answer: C
Explanation:
you can change the number of versions of backups to keep with settings in the Operations Center: Backups1. If you use commands, you can use the DEFINE COPYGROUP command with the VEREXISTS parameter1.
NEW QUESTION # 53
......
IBM C1000-082 exam is intended for IT professionals who are responsible for managing, maintaining and troubleshooting IBM Spectrum Protect V8.1.9. C1000-082 exam is ideal for individuals who are seeking to enhance their skills in managing and administering data backup and recovery systems. IBM Spectrum Protect V8.1.9 Administration certification exam is suitable for IT professionals who want to excel in their career and be recognized for their expertise.
Quickly and Easily Pass IBM Exam with C1000-082 real Dumps: https://prepaway.testkingpass.com/C1000-082-testking-dumps.html