Latest Success Metrics For Actual NSE7_EFW-7.0 Exam (Updated 165 Questions)
Genuine NSE7_EFW-7.0 Exam Dumps Free Demo Valid QA's
Fortinet NSE7_EFW-7.0 exam is a valuable certification that demonstrates an individual's skills and knowledge of the Fortinet NSE 7 - Enterprise Firewall 7.0 technology. Fortinet NSE 7 - Enterprise Firewall 7.0 certification is highly valued in the industry and enhances an individual's credibility and marketability. The Fortinet NSE 7 - Enterprise Firewall 7.0 technology is an essential security solution that provides organizations with superior protection against cyber threats. NSE7_EFW-7.0 exam is designed to evaluate an individual's understanding of the technology and assess their ability to configure, manage, and troubleshoot the technology effectively.
NEW QUESTION # 21
Examine the following partial output from a sniffer command; then answer the question below.
What is the meaning of the packets dropped counter at the end of the sniffer?
- A. Number of packets that matched the sniffer filter and were dropped by the FortiGate.
- B. Number of packets that matched the sniffer filter but could not be captured by the sniffer.
- C. Number of total packets dropped by the FortiGate.
- D. Number of packets that didn't match the sniffer filter.
Answer: B
Explanation:
https://kb.fortinet.com/kb/documentLink.do?externalID=11655
NEW QUESTION # 22
Refer to the exhibit, which shows the output of a BGP debug command.
What can be concluded about the router in this scenario?
- A. The router 100.64.3.1 needs to update the local AS number in its BGP configuration in order to bring up the BGP session with the local router.
- B. All of the neighbors displayed are part of a single BGP configuration on the local router with the neighbor-range set to a value of 4.
- C. The BGP session with peer 10.127.0.75 is up.
- D. The State/PfxRcd for neighbor 100.64.3.1 will not change until an administrator on the local router adjusts the inbound route filtering so that prefixes received can be added to the RIB.
Answer: C
NEW QUESTION # 23
An administrator has been assigned the task of creating a set of firewall policies which must be evaluated before any custom policies defined within the policy packages of managed FortiGate devices, across all 25 ADOMSs in FortiManager.
How should the administrator accomplish this task?
- A. Move the FortiGate devices into a single globally scoped ADOM, and merge policy packages, inserting the new firewall policies at the top.
- B. Create a header policy in the Global ADOM containing the firewall policies that must be evaluated first, and then assign this header policy to all other ADOMs.
- C. Use a CLI script from the root ADOM on FortiManager to push these new policies to all FortiGate devices, through the FGFM tunnel.
- D. Create a footer policy in the Global ADOM containing the firewall policies that must be evaluated first, and then assign this footer policy to all other ADOMs.
Answer: B
Explanation:
Enterprise_Firewall_7.0_Study_Guide-Online.pdf p 244
NEW QUESTION # 24
Examine the output of the 'get router info bgp summary' command shown in the exhibit; then answer the question below.
Which statements are true regarding the output in the exhibit? (Choose two.)
- A. The local BGP peer has received a total of 3 BGP prefixes.
- B. BGP peer 10.200.3.1 has never been down since the BGP counters were cleared.
- C. BGP state of the peer 10.125.0.60 is Established.
- D. Local BGP peer has not received an OpenConfirm from 10.200.3.1.
Answer: C,D
NEW QUESTION # 25
View the exhibit, which contains the output of a diagnose command, and then answer the question below.
Which statements are true regarding the output in the exhibit? (Choose two.)
- A. FortiGate used 209.222.147.3 as the initial server to validate its contract.
- B. FortiGate will probe 121.111.236.179 every fifteen minutes for a response.
- C. Servers with the D flag are considered to be down.
- D. Servers with a negative TZ value are experiencing a service outage.
Answer: A,B
NEW QUESTION # 26
View the exhibit, which contains a session entry, and then answer the question below.
Which statement is correct regarding this session?
- A. It is a TCP session in ESTABLISHED state from 10.1.10.10 to 10.200.5.1.
- B. It is a TCP session in CLOSE_WAIT state from 10.1.10.10 to 10.200.1.1.
- C. It is an ICMP session from 10.1.10.10 to 10.200.5.1.
- D. It is an ICMP session from 10.1.10.10 to 10.200.1.1.
Answer: C
NEW QUESTION # 27
Which two statements about OCVPN are true? (Choose two.)
- A. Only root vdom supports OCVPN.
- B. OCVPN offers only Hub-Spoke VPNs.
- C. OCVPN supports static and dynamic IPs in WAN interface.
- D. FortiGate devices under different FortiCare accounts can be used to form OCVPN.
Answer: A,C
NEW QUESTION # 28
An administrator has configured a FortiGate device with two VDOMs: root and internal. The administrator has also created and inter-VDOM link that connects both VDOMs. The objective is to have each VDOM advertise some routes to the other VDOM via OSPF through the inter-VDOM link. What OSPF configuration settings must match in both VDOMs to have the OSPF adjacency successfully forming? (Choose three.)
- A. OSPF interface area.
- B. Interface subnet mask.
- C. Router ID.
- D. OSPF interface MTU.
- E. OSPF interface cost.
Answer: A,B,D
NEW QUESTION # 29
An administrator is running the following sniffer in a FortiGate:
diagnose sniffer packet any "host 10.0.2.10" 2
What information is included in the output of the sniffer? (Choose two.)
- A. IP payload.
- B. Port names.
- C. IP headers.
- D. Ethernet headers.
Answer: A,C
NEW QUESTION # 30
Refer to the exhibits.
Which contain the partial configurations of two VPNs on FortiGate.
An administrator has configured two VPNs for two different user groups. Users who are in the Users-2 group are not able to connect to the VPN. After running a diagnostics command, the administrator discovered that FortiGate is not matching the user-2 VPN for members of the Users-2 group.
Which two changes must administrator make to fix the issue? (Choose two.)
- A. Use different pre-shared keys on both VPNs
- B. Change to aggressive mode on both VPNs.
- C. Set up specific peer IDs on both VPNs.
- D. Enable Mode Config on both VPNs.
Answer: B,C
NEW QUESTION # 31
View the exhibit, which contains the partial output of an IKE real-time debug, and then answer the question below.
Which statements about this debug output are correct? (Choose two.)
- A. The remote gateway IP address is 10.0.0.1.
- B. The negotiation is using AES128 encryption with CBC hash.
- C. It shows a phase 1 negotiation.
- D. The initiator has provided remote as its IPsec peer ID.
Answer: C,D
NEW QUESTION # 32
Which two conditions must be met for a statistic route to be active in the routing table? (Choose two.)
- A. There is no other route, to the same destination, with a higher distance.
- B. The outgoing interface is up.
- C. The next-hop IP address is up.
- D. The link health monitor (if configured) is up.
Answer: B,D
NEW QUESTION # 33
An administrator has configured two FortiGate devices for an HA cluster. While testing HA failover, the administrator notices that some of the switches in the network continue to send traffic to the former primary device.
What can the administrator do to fix this problem?
- A. Configure remote link monitoring to detect an issue in the forwarding path.
- B. Verify that the speed and duplex settings match between the FortiGate interfaces and the connected switch ports.
- C. Configure set link-failed-signal enable under config system ha on both cluster members.
- D. Configure set send-garp-on-failover enable under config system ha on both cluster members.
Answer: C
Explanation:
Virtual MAC Address and Failover - The new primary broadcasts Gratuitous ARP packets to notify the network that each virtual MAC is now reachable through a different switch port. - Some high-end switches might not clear their MAC table correctly after a failover - Solution: Force former primary to shut down all its interfaces for one second when the failover happens (excluding heartbeat and reserved management interfaces): #Config system ha set link-failed-signal enable end - This simulates a link failure that clears the related entries from MAC table of the switches.
NEW QUESTION # 34
Examine the output of the 'get router info bgp summary' command shown in the exhibit; then answer the question below.
Which statement can explain why the state of the remote BGP peer 10.200.3.1 is Connect?
- A. The TCP session for the BGP connection to 10.200.3.1 is down.
- B. The local peer is receiving the BGP keepalives from the remote peer but it has not received the OpenConfirm yet.
- C. The local peer is receiving the BGP keepalives from the remote peer but it has not received any BGP prefix yet.
- D. The local peer has received the BGP prefixed from the remote peer.
Answer: A
Explanation:
http://www.ciscopress.com/articles/article.asp?p=2756480&seqNum=4
NEW QUESTION # 35
Which two statements about an auxiliary session are true? (Choose two.)
- A. With the auxiliary session setting disabled, for each traffic path, FortiGate uses the same auxiliary session.
- B. With the auxiliary session setting enabled, ECMP traffic is accelerated to the NP6 processor.
- C. With the auxiliary session setting enabled, two sessions are created in case of routing change.
- D. With the auxiliary session setting disabled, only auxiliary sessions are offloaded.
Answer: B,C
Explanation:
Reference:
NSE7 Study Guide Chapter 4 , slide "ECMP Accelerated with Auxiliary session"
NEW QUESTION # 36
A FortiGate device has the following LDAP configuration:
The LDAP user student cannot authenticate.
The exhibit shows the output of the authentication real time debug while testing the student account:
Based on the above output, what FortiGate LDAP settings must the administer check? (Choose two.)
- A. cnid.
- B. password.
- C. dn.
- D. username.
Answer: B,D
NEW QUESTION # 37
......
NSE7_EFW-7.0 Practice Test Give You First Time Success with 100% Money Back Guarantee!: https://prepaway.testkingpass.com/NSE7_EFW-7.0-testking-dumps.html