Prepare With Top Rated High-quality JN0-363 Dumps For Success in JN0-363 Exam
JN0-363 Free Certification Exam Easy to Download PDF Format 2023
To be eligible for the JNCIS-SP certification, candidates must have a basic understanding of networking and the OSI model, as well as a working knowledge of Junos OS. They should also have experience working with service provider routing and switching technologies and be familiar with protocols such as BGP, OSPF, and IS-IS.
NEW QUESTION # 61
Click the Exhibit button.
In the network shown in the exhibit, all switches are configured with the default STP root bridge priority, and Switch A has been selected as root. You recently added the older Switch D into the network as an access switch, and notice it has taken over as root.
Which configuration would solve this problem?
- A.
- B.
- C.
- D.
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/no-root-port-edit-protocols-stp.html
NEW QUESTION # 62
Exhibit
Which type of load balancing is shown in the exhibit?
- A. elastic load balancing
- B. per-flow load balancing
- C. network load balancing
- D. per-packet load balancing
Answer: C
NEW QUESTION # 63
Which two characteristics describe IS-IS? (Choose two.)
- A. A Level 1 IS routes between areas and toward other autonomous systems
- B. A collection of Level 1 routers serves as the IS-IS backbone
- C. Level 2 routers connect areas in an IS-IS autonomous system
- D. A collection of Level 2 routers serve as the IS-IS backbone
Answer: C,D
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/concept/isis-levels-understanding.html
NEW QUESTION # 64
You are asked to assign interface xe-1/0/5 to a virtual switch. What must be accomplished to complete the configuration?
- A. Interface xe-1/0/5 must be added to routing-instance sw-1 vlan_2.
- B. Interface xe-1/0/5 must be added to routing-instance sw-1.
- C. Interface xe-1/0'5 must be a trunk port.
- D. An IRB interface must be configured to routing-instance sw-1 vlan_2.
Answer: B
NEW QUESTION # 65
Which LSA type does an OSPF ABR use to advertise external routes generated by an NSSAASBR into the backbone?
- A. Type 1
- B. Type 3
- C. Type 7
- D. Type 5
Answer: B
NEW QUESTION # 66
Click the Exhibit button. Which two topologies shown in the exhibit could be implemented without a spanning-tree protocol? (Choose two.)
- A. mesh
- B. ring
- C. tree
- D. star
Answer: C,D
NEW QUESTION # 67
In which situation would you disable penultimate-hop popping?
- A. When you want to ensure the penultimate router can perform the destination route lookup
- B. When you want to utilize a penultimate router that supports IPv6 tunneling
- C. When you want to bypass a penultimate router that does not support IPv6 tunneling
- D. When you want to enforce the same class-of-service behavior through the entire LSP
Answer: D
NEW QUESTION # 68
Which two IS-IS packet types are used to maintain IS-IS database synchronization? (Choose two.)
- A. LSP
- B. IIH
- C. PSNP
- D. CSNP
Answer: C,D
NEW QUESTION # 69
You want to disable MAC learning only for interface ge-0/0/0.0 on an MX Series device.
Which syntax will accomplish this task?
- A.
- B.
- C.
- D.
Answer: B
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/layer-2-services-mac-bridge-domain-or-logical-interface-disabling-learning-for.html
NEW QUESTION # 70
Which two statements are true about IBGP on MX Series devices? (Choose two.)
- A. It is loop free by default
- B. It does not support multihop
- C. Neighbors can be located anywhere within the AS
- D. Interface Lo0 must be used for peering
Answer: A,C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/bgp-ibgp-peering.html
NEW QUESTION # 71
An Ethernet bridge is configured such that all interfaces are in a single broadcast domain.Which two tasks does the bridge perform in response to receiving a frame with an unknown unicast destination MAC address? (Choose two.)
- A. It drops the frame.
- B. It learns the destination MAC address.
- C. It floods the frame out of all interfaces except the one on which is was received.
- D. It learns the source MAC address.
Answer: C,D
NEW QUESTION # 72
An OSPF router does not have a router ID configured.
In this scenario, which statement is correct about the router ID?
- A. The Junos OS will use the IP address assigned to the interface with the lowest MAC address.
- B. A router ID will not be assigned until it is manually configured.
- C. The Junos OS will use the IP address assigned to the loopback interface for the router ID.
- D. The Junos OS will use the IP address assigned to the Interface with the highest priority.
Answer: B
NEW QUESTION # 73
Click the Exhibit.
Referring to the exhibit, the GRE tunnel between R-1 and R2 allows connectivity between User-1 and Server-1. User-1 can communicate with Server-1 with packets that are up to 1448 bytes in size.
However, if the packet size is larger than 1448, User-1 cannot communicate with Server-1.
In this scenario, how do you solve the communication problem?
- A. Change the physical MTU on the ge-0/0/3 interfaces on R-1 and R-2 to 1448 bytes.
- B. Apply the path-mtu-discovery statement to the GRE tunnel configuration.
- C. Change the physical MTU on the gr-0/0/0 interfaces on R-1 and R-2 to 1448 bytes.
- D. Apply the allow-fragmentation statement to the GRE tunnel configuration.
Answer: D
NEW QUESTION # 74
Click the Exhibit.
You have just configured a GRE tunnel, but you notice that the GRE tunnel is flapping.
Referring to the exhibit, which two would you take to solve this problem? (Choose two.)
- A. Add a specific route to the remote device's loopback address with the next-hop device defined as the next-hop gateway.
- B. Add a specific static route to the local peer's network with the remote devices'loopback address as the next-hop gateway.
- C. Remove the existing 192.168.2.0/30 static route.
- D. Set the GRE interface with a larger TTL value.
Answer: A,C
NEW QUESTION # 75
Click the Exhibit button. An interface is configured as shown in the exhibit. What must also be configured for this interface to participate in VLAN 100 and 200?
- A. encapsulation type
- B. bridge domains
- C. broadcast domains
- D. VLANs
Answer: B
NEW QUESTION # 76
You are logged into a PE router participating in a Layer 3 VPN as defined in RFC 4364. You would like to ping the remotely connected CE router's loopback address. The address of the loopback is 122.161.2.1, the VPN routing-instance is called VPN-C.Which command will accomplish this goal?
- A. ping vpn-instance VPN-C 122.161.2.1
- B. ping routing-instance VPN-C 122.161.2.1
- C. ping instance VPN-C 122.161.2.1
- D. ping VPN-C 122.161.2.1
Answer: B
NEW QUESTION # 77
Interface ge-0/0/0.0 connecls yout network to your ISP. You want to advertise this interface address as an Internal route In OSPF without creating a neighbor with your ISP.
In this scenario, how is this task accomplished?
- A. Remove interface ge-0/0/0.0 from OSPF.
- B. Add ge-0/0/0.0 as a passive interface In OSPF.
- C. Create a generated route for Interface ge-0/0/0.0.
- D. Configure a static route for Interface ge-0/0/0.0.
Answer: D
NEW QUESTION # 78
You are using RSVP to signal an MPLS LSP.
Which statement is true in this scenario?
- A. The traffic engineering database must be used for all LSPs.
- B. A primary path must be configured to establish an LSP.
- C. LSPs can be configured without any traffic engineering constraints.
- D. A secondary path must be configured to establish an LSP.
Answer: C
NEW QUESTION # 79
......
Get 100% Success with Latest JNCIS-SP JN0-363 Exam Dumps: https://prepaway.testkingpass.com/JN0-363-testking-dumps.html