HPE0-S59 Exam Info and Free Practice Test All-in-One Exam Guide Dec-2023
Pass HP HPE0-S59 Actual Free Exam Q&As Updated Dump Dec 24, 2023
To prepare for the HP HPE0-S59 exam, HPE offers a variety of training courses, including instructor-led training, online training, and self-paced training. Additionally, the HPE Learning Center offers practice exams, study guides, and other resources to help you prepare for the exam.
HP HPE0-S59 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
NEW QUESTION # 30
You are troubleshooting an HPE OneView server profile that presents a critical state. The server profile was configured with a Link Aggregation Group What should you check to fix the issue?
- A. if the logical enclosure is configured with redundant master modules
- B. if both FiexNICs are connected to different networks
- C. if both FiexNICs are configured with the same speed
- D. If the logical enclosure is built on at least three HPE Synergy frames
Answer: C
NEW QUESTION # 31
Which statement about login redistribution is true?
- A. Login redistribution is a licensed feature and the number of licenses required depends on the number of active ports
- B. Login redistribution is available only If HPE Primera or HPE Alletra is connected directly to the HPE Synergy frame
- C. Login redistribution is used for login balancing when they are not distributed evenly over the FC links
- D. Login redistribution is supported only on the HPE Synergy Virtual Connect SE 32Gb FC Modules
Answer: D
NEW QUESTION # 32
Match each HPE Synergy logical component with the definition.
Answer:
Explanation:
NEW QUESTION # 33
Which statement about the HPE D3940 storage module is true?
- A. Only one type of drives (SATA, SAS, SSD) can be installed in each module
- B. Up to five modules can be installed in a single frame with Gen10 servers
- C. it is configured through CLl available from HPE Synergy console
- D. SATA drives requires redundant 10 adapters to be installed in this module
Answer: C
NEW QUESTION # 34
Your customer wants to compare HPE Superdome Flex with HPE Superdome Flex 280.
Which statement about these two systems is true?
- A. Only HPE Superdome Flex 280 can support multiple nPars
- B. Only HPE Superdome Flex supports 32 sockets and 48TB of memory
- C. Only HPE Superdome Flex supports HPE Persistent Memory
- D. Only HPE Superdome Rex 280 can be managed using HPE OneView
Answer: D
NEW QUESTION # 35
Match HPE SimpliVity team with the definition.
Answer:
Explanation:
NEW QUESTION # 36
Your customer reports mat an external FC boot volume for Windows server is visible four times in the Disk Management 1 online and 3 offline.
What should you do to resolve this issue?
- A. Remove the offline disks using array management tools
- B. Disable deduplication for this volume at the array level
- C. Remove the offline disks using Windows Disk Management
- D. Install and configure MPIO on me Windows system
Answer: D
NEW QUESTION # 37
Which statement about a new HPE SimpliVity deployment is true?
- A. All new HPE SimpliVity models are based on AMD CPUs
- B. All new HPE SimpliVity models support deduplication and compression
- C. New HPE SimpliVity deployments are licensed per node not per physical socket
- D. New HPE SimpliVity deployments give customer flexible choice of hypervisor
Answer: B
NEW QUESTION # 38
Your customer is implementing an HPE Synergy solution based on three frames.
Click each of the ports that can be used to connect satellite modules.
Answer:
Explanation:
NEW QUESTION # 39
Your customer plans to deploy HPE OneView for VMware vCenter Server together with HPE Storage Integration Pack for VMware vCenter. The customer wants to use them to manage HPE Synergy Gen10 compute modules. HPE ProLiant Gen 10 servers and an MSA array.
Which statement about compatibility of the existing environment with the planned software components is true?
- A. HPE OneView for VMware vCenter Server does not support standalone HPE ProLiant servers
- B. HPE Storage integration Pack for VMware vCenter does not support MSA arrays
- C. To use the required plugins HPE ProLiant Gen10 systems must be managed using HPE OneView
- D. Both HPE Synergy Gen10 full-height compute module plugins will require a license
Answer: A
NEW QUESTION # 40
An administrator tries to open iLO interlace from HPE OneView Instead of being automatically logged in a login prompt displays Where should you start the troubleshooting process?
- A. At the iLO interface to verify whether the ILO Advanced license is properly applied
- B. At HPE OneView Interface to verify whether the server is In the maintenance mode
- C. At HPE OneView Interface to verify whether the iLO processor is disabled
- D. At the iLO interface to verify whether the SSO certificate is removed from an iLO.
Answer: A
NEW QUESTION # 41
Your customer has an HPE Synergy platform deployed and managed using HPE OneView. The customer also has HPE Superdome Flex with RMC deployed They plan to deploy a second nPar and HPE Superdome Flex
280 They plan to manage new components using HPE OneView
What must be done to achieve this goal?
- A. The customer has to add HPE Superdome Flex to the HPE OneView used to manage HPE Synergy
- B. The customer should deploy an HPE OneView appliance for HPE Superdome Flex management
- C. The customer must use IL05 to add HPE Superdome Flex systems to HPE OneView
- D. The customer must add a second Rack Management Controller for HPE Superdome Flex 280
Answer: D
NEW QUESTION # 42
Your customer reports that they cannot deploy HPE Synergy compute nodes using HPE OneView for VMware vCenter Server (HPE OV4VC).
What should you check during troubleshooting process?
- A. If an compute nodes are added to the vCenter Server
- B. If HPE OneView credentials are added in vCenter Server
- C. If the HPE Oneview instance Is integrated with HPE OV4VC.
- D. If vCenter Server is licensed in the HPE Oneview interface
Answer: A
NEW QUESTION # 43
Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has an appropriate storage controller Installed and two 12Gb SAS switches installed in the first fabric.
The customer reports that compute nodes cannot access the storage module. What should you verify first when troubleshooting this problem?
- A. If there is at least one ISCSI network configured that will provide access to the module.
- B. If there Is a logical interconnect created based on the 12Gb SAS switches.
- C. If the D3940 storage module is property licensed through HPE OneView interface.
- D. If the D3940 module is imported in managed state that allows volume provisioning.
Answer: D
NEW QUESTION # 44
Your customer has 6 logical enclosures spanning 18 HPE Synergy frames. The customer needs to add one more logical enclosure based on 5 HPE Synergy frames How will this change impact the customer environment?
- A. The customer can add a new logical enclosure to the existing setup because the maximum number of logical enclosures in a single management ring is not reached.
- B. The customer has to create a new management ring for new logical enclosure because the maximum number of frames m a single management ring is reached.
- C. The customer has to expand the management ring capacity either by adding HPE Composer 2 modules or adding memory to reach 128GB per module.
- D. The customer can add a new logical enclosure to an existing setup once all required licenses are added lo HPE OneView and associated with the new frames.
Answer: A
NEW QUESTION # 45
Which statement about HPE Apollo 2000 Gen10 Plus platform is true?
- A. It is fully managed using HPE OneView including all connections
- B. It can support a single processor only and up to 4 per chassis
- C. It is equipped with HPE Persistent memory by default
- D. It offers servers with AMD EPYC and Intel Xeon Scalable CPUs
Answer: B
NEW QUESTION # 46
Your customer plans to use HPE OneView for VMware vCenter Server to deploy ESXi systems. They created a server profile template that they want to use in HPE OneView.
Put the steps required to configure HPE OneView for VMware vCenter Server on the left into their correct order on the right.
Answer:
Explanation:
NEW QUESTION # 47
Which tool can be used to evaluate me health of an HPE Oneview appliance before proceeding with an appliance updated.
- A. HPE OneView Update Readiness Checker
- B. HPE OneView Firmware Compliance Report
- C. HPE Composer Maintenance Console
- D. HPE OneView Global Dashboard
Answer: C
NEW QUESTION # 48
Your customer plans to deploy VMware ESXi 7. 0 U2, and they are looking for a hardware platform that will allow them to use up to 16 CPU sockets Which HPE compute system meets the customer requirements?
- A. HPE Synergy 480 Gen10 Plus
- B. HPE Superdome Flex system
- C. HPE ProLiant OL380 Gen 10 Plus
- D. HPE ProLiant DL580 Gen10
Answer: A
NEW QUESTION # 49
Which statement about an HPE Oneview support dump is true?
- A. Support dump can be created if HPE Virtual Connect modules are installed in the frame
- B. Support dump is a binary file that can be opened only in a dedicated application
- C. Appliance support dump by default contains a logical enclosure support dump
- D. Preview support dump is available only when creating an appliance support dump
Answer: B
NEW QUESTION # 50
Match each HPE OneView network type with its definition.
Answer:
Explanation:
NEW QUESTION # 51
Refer to the exhibit.
Which statement about this logical interconnect group is true?
- A. Both modules are located in different frames for redundancy
- B. interconnect modules are installed in interconnect bays 1 and 4
- C. An additional license is required to change the enclosure count
- D. For an uplink set, ports from different modules can be selected
Answer: C
NEW QUESTION # 52
Your customer experienced some problems caused by outdated HPE Superdome Flex firmware. Which update method should they use to avoid these issues in the future?
- A. HPE SUM if HPE Persistent Memory firmware must be updated
- B. RMC CLI to update I/O and HPE Persistent Memory firmware
- C. HPE OneView IT HPE Persistent Memory firmware must be updated.
- D. HPE OneView method for I/O firmware update procedure
Answer: B
NEW QUESTION # 53
What is a restriction of using a RoCE network?
- A. It does not support Private VLAN and Multicast VLAN.
- B. it is not supported with HPE Virtual Connect SE 40 GD F8 Module for HPE Synergy.
- C. It is by default configured as an untagged network and cannot be a part of a network set.
- D. It does not support smart link and private network features.
Answer: C
NEW QUESTION # 54
......
Online Questions - Valid Practice HPE0-S59 Exam Dumps Test Questions: https://prepaway.testkingpass.com/HPE0-S59-testking-dumps.html