[Jan 15, 2024] Get to the Top with HPE0-S59 Practice Exam Questions
Use Real HPE0-S59 Dumps Free Sample Questions and Practice Test Engine
HPE0-S59 exam is aimed at IT professionals who are responsible for planning, designing, and implementing HPE compute solutions. It is also suitable for individuals who are interested in pursuing a career in HPE Compute Solutions. HPE0-S59 exam is designed to assess the candidates' ability to work with HPE compute solutions and their knowledge of HPE server architecture, HPE ProLiant Gen10 and Gen9 server technologies, and HPE Synergy, Apollo, and SimpliVity solutions.
NEW QUESTION # 29
Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They plan to use Distributed Switches and DRS cluster You are preparing a proposal with the following components:
- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules
- two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- an appropriate number of the vSphere Standard licenses for each compute node
- one HPE D3940 Storage Modules with 40 SSDs - all required cables and options Which statement about this proposal is true?
- A. One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM
- B. vSphere Standard licenses should be replaced with Enterprise Pius licenses to enable requested features
- C. 20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drive.
- D. 2 additional HPE Synergy 480 Gen10 Plus compute modules can be added to this setup
Answer: B
NEW QUESTION # 30
Which statement about HPE OneView milestone releases is true?
- A. A milestone release is a release which must be installed on HPE Composer to support current version of the Service Pack for Synergy
- B. A milestone release is a release that is published when HPE releases new hardware components to immediately support new systems
- C. A milestone release is available for selected partners that give access to HPE OneView features which are not officially announced.
- D. A milestone release is a release with an enhanced update architecture mat is a prerequisite prior to updating to a subsequent release.
Answer: A
NEW QUESTION # 31
Your customer added a new Ethernet network in HPE Oneview mat is used to manage their HPE Synergy platform.
When the customer tries to connect one of the compute nodes to this network through the server profile, this network is not available.
What must be done to fix this issue?
- A. Check within the server profile which server hardware is used and perform the Refresh operation on this compute node to get the latest adapter information.
- B. To make this network available to use in the server profile, the customer must enable the Smart Link feature within network definition.
- C. Check the Logical Enclosure settings and verify if the maximum number of networks allowed for this LE is reached.
- D. The newly created network must be added to the uplink set within the LIG, and Logical interconnect configuration must be updated from the LIG.
Answer: D
NEW QUESTION # 32
Your customer plans to use HPE OneView for VMware vCenter Server to deploy ESXi systems. They created a server profile template that they want to use in HPE OneView.
Put the steps required to configure HPE OneView for VMware vCenter Server on the left into their correct order on the right.
Answer:
Explanation:
NEW QUESTION # 33
Your customer plans to deploy ESXi systems to HPE Synergy and HPE ProLiant servers using HPE OneView for VMware vCenter Server.
Which statement about HPE OneView for VMware vCenter Server functionality is true for this environment?
- A. Individual systems can be added to HPE OneView for VMware vCenter Server through an ILO management processor
- B. HPE Synergy requires HPE Composer 2 for full functionality of HPE OneView for VMware vCenter Server
- C. HPE ProLiant servers need an HPE OneView for VMware vCenter Server license for full functionality
- D. Only systems managed using HPE Oneview can use HPE Oneview for VMware vCenter Server functionalities
Answer: C
NEW QUESTION # 34
After deploying HPE Superdome Flex 280 you need to check Core Analysis Engine (CAE) Log.
Click the appropriate section in the HPE Superdome Flex 280 management interface that will allow you to complete this task.
Answer:
Explanation:
NEW QUESTION # 35
Click the area within the iLO management interface that will allow you to access workload Advisor.
Answer:
Explanation:
NEW QUESTION # 36
Which HPE Virtual Connect feature allows an administrator to suppress excessive inbound multicast broadcast and destination lookup failure (OLF) packets?
- A. Loop protection
- B. LLDP tagging
- C. Storm control
- D. Pause flood protection
Answer: C
NEW QUESTION # 37
Your customer has 6 logical enclosures spanning 18 HPE Synergy frames. The customer needs to add one more logical enclosure based on 5 HPE Synergy frames How will this change impact the customer environment?
- A. The customer can add a new logical enclosure to an existing setup once all required licenses are added lo HPE OneView and associated with the new frames.
- B. The customer can add a new logical enclosure to the existing setup because the maximum number of logical enclosures in a single management ring is not reached.
- C. The customer has to expand the management ring capacity either by adding HPE Composer 2 modules or adding memory to reach 128GB per module.
- D. The customer has to create a new management ring for new logical enclosure because the maximum number of frames m a single management ring is reached.
Answer: B
NEW QUESTION # 38
Your customer plans to setup an HPE Synergy solution based on SY480 Gen10 compute nodes with the following connectivity options - SAS connectivity installed in the first fabric - FC connectivity Installed In the second fabric - Ethernet connectivity installed in the third fabric.
Which statement regarding this setup is true?
- A. Interconnect modules that provide SAS connectivity should be moved to the third fabric
- B. Each compute node must have at least 768GB of memory installed
- C. Compute nodes must have a second CPU installed to access the second fabric.
- D. Each interconnect module in each fabric must be properly licensed in HPE OneView
Answer: B
NEW QUESTION # 39
Match each HPE Synergy logical component with the definition.
Answer:
Explanation:
NEW QUESTION # 40
Your customer plans to deploy VMware ESXi 7. 0 U2, and they are looking for a hardware platform that will allow them to use up to 16 CPU sockets Which HPE compute system meets the customer requirements?
- A. HPE ProLiant OL380 Gen 10 Plus
- B. HPE Superdome Flex system
- C. HPE Synergy 480 Gen10 Plus
- D. HPE ProLiant DL580 Gen10
Answer: C
NEW QUESTION # 41
Your customer reports mat an external FC boot volume for Windows server is visible four times in the Disk Management 1 online and 3 offline.
What should you do to resolve this issue?
- A. Install and configure MPIO on me Windows system
- B. Remove the offline disks using Windows Disk Management
- C. Remove the offline disks using array management tools
- D. Disable deduplication for this volume at the array level
Answer: A
NEW QUESTION # 42
You plan to configure a Link Aggregation Group (LAG) for two connections within a server profile for a compute node running an ESXI system.
What is required from the VMware side to enable LAG?
- A. Virtual Distributed Switch
- B. Dedicated VMKernel port
- C. Load balancing cluster
- D. vSphere Standard license
Answer: B
NEW QUESTION # 43
Which statement about an HPE Oneview support dump is true?
- A. Preview support dump is available only when creating an appliance support dump
- B. Support dump is a binary file that can be opened only in a dedicated application
- C. Appliance support dump by default contains a logical enclosure support dump
- D. Support dump can be created if HPE Virtual Connect modules are installed in the frame
Answer: B
NEW QUESTION # 44
Your customer has an HPE Synergy platform deployed and managed using HPE OneView. The customer also has HPE Superdome Flex with RMC deployed They plan to deploy a second nPar and HPE Superdome Flex
280 They plan to manage new components using HPE OneView
What must be done to achieve this goal?
- A. The customer should deploy an HPE OneView appliance for HPE Superdome Flex management
- B. The customer has to add HPE Superdome Flex to the HPE OneView used to manage HPE Synergy
- C. The customer must use IL05 to add HPE Superdome Flex systems to HPE OneView
- D. The customer must add a second Rack Management Controller for HPE Superdome Flex 280
Answer: D
NEW QUESTION # 45
Your customer reports that they cannot deploy HPE Synergy compute nodes using HPE OneView for VMware vCenter Server (HPE OV4VC).
What should you check during troubleshooting process?
- A. If the HPE Oneview instance Is integrated with HPE OV4VC.
- B. If an compute nodes are added to the vCenter Server
- C. If vCenter Server is licensed in the HPE Oneview interface
- D. If HPE OneView credentials are added in vCenter Server
Answer: B
NEW QUESTION # 46
......
Pass HP HPE0-S59 exam - questions - convert Tets Engine to PDF: https://prepaway.testkingpass.com/HPE0-S59-testking-dumps.html