300-515 Certification Exam Dumps Questions in here [Jan-2023]
Updated 300-515 Exam Practice Test Questions
How to study the Implementing Cisco Service Provider VPN Services (300-515 SPVI) Exam
For the Implementing Cisco Service Provider VPN Services (300-515 SPVI) Exam, Cisco offers several options on their website. Cisco provides classroom training through which Cisco's authorised learning partners teach instructor-led classes all over the world. E-Learning solutions are provided be Cisco for exam preparation via selp-paced online courses. Students are highly encouraged to join Cisco's Certification communinty where they can join students from all over the world and learn together. After taking all the official training courses, 300-515 SPVI practice exams are must to get a proper understanding of exam format and question types. For further exam self-study materials, refer to the links down below:
Classroom Training E-Learning Certification Community Practice Exams
We recommend a combination of hands-on experience, completion of the training course, and self-study in the areas described in the Exam Outline section of this exam guide as preparation for this exam.
Hover on to Cisco's Website and complete the official training course provided for the exam. Check for the topics mentioned in the Exam Outline section of this guide to review the online documentation, tip sheets, and user guides and study the details relevant to those topics. Refer to the links at the end of this document for more study material.
NEW QUESTION 24
Refer to the exhibit.
An engineer is implementing an MPLS P2MP TE solution. Which type of router can serve as the midpoint router and the tailend router in this P2MP TE network implementation?
- A. bud
- B. transit
- C. source
- D. headend
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/routers/asr920/configuration/guide/mpls/mp-te-path-setup-xe-3s-asr920-book/mp-te-path-setup-xe-3s-asr920-book_chapter_01.html
NEW QUESTION 25
Drag and Drop Question
Drag and drop the EVPN components from the left onto the correct planes on the right.
Answer:
Explanation:
NEW QUESTION 26 
Refer to the exhibit. Which effect of this configuration is true?
- A. It configures VPWS single homed.
- B. It configures VPWS multihomed.
- C. It configures MPLS traffic engineering.
- D. It configures an IPv4 peering with 192.168.1.1
Answer: A
Explanation:
Section: Layer 2 VPNs
Explanation/Reference: https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2019/pdf/BRKSPG-2798.pdf
NEW QUESTION 27
Refer to the exhibit.
Which result occurs when PE1 learns a new MAC address and all three PEs are enabled with EVPN native?
- A. The MAC address is entered into the CAM table and is classified for use on the native VLAN
- B. The MAC address is entered into the CAM table only if it is learned on the native VLAN.
- C. A system notification is sent to the network administrator that triggers the manual configuration of the new MAC address on PE2 and PE3.
- D. The new MAC address is sent by BGP to PE2 and PE3 as a Type 2 BGP route.
Answer: D
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k-r6-4/lxvpn/configuration/ guide/b-l2vpn-cg-asr9000-64x/b-l2vpn-cg-asr9000-64x_chapter_01011.html
NEW QUESTION 28 
Refer to the exhibit. A network operator is implementing EVPN IRB on PE1. Which two command placements enable the advertisement of Type 2 routes and what information do Type 2 routes contain?
(Choose two.)
- A. The operator adds in "host-routing" under the BVI651 interface.
- B. Type 2 routes contain inclusive source-specific multicast route information.
- C. Type 2 routes contain MAC/IP information.
- D. Type 2 routes contain Ethernet Auto-Discovery information.
- E. The operator adds in "host-routing" under the VRF EVPN.
Answer: A,C
Explanation:
Section: VPN Architecture
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/iosxr/ncs5500/vpn/61x/b-ncs5500-l2vpn-configuration- guide-61x/b-ncs5500-l2vpn-configuration-guide-61x_chapter_01010.html
NEW QUESTION 29
Which method can be used to discover targeted LDP neighbors dynamically when configuring VPLS between PE routers?
- A. VPLS peers under the VFI
- B. BGP autodiscovery
- C. VPWS
- D. BGP
Answer: B
NEW QUESTION 30
Refer to the exhibit.
An engineer has configured router 1 to provide shared services to clients behind router 2. To complete the implementation so that routes from router 1 are accepted, what must the engineer configure on router 2?
- A. with import route targets 201:202 and 401:402
- B. with export route targets 201:202 and 401:402
- C. with import route targets 101:102 and 202:201
- D. with export route targets 301:202 and 101:102
Answer: A
NEW QUESTION 31
Refer to the exhibit. Router 1 is a P router in the ISP MPLS core.
A connected P router cannot generate an MPLS label for the router 1 loopback0 interface.
Which action resolves this issue?
- A. The loopback0 interface must be in OSPF area 0.
- B. The OSPF network type must be changed on loopback0 to point-to-point
- C. The network statement under the routing process must have a wildcard mask of 0 0.0 255.
- D. A static route to null 0 must be added for the loopback interface and then static routes must be redistributed into OSPF
Answer: C
NEW QUESTION 32
Refer to the exhibit.
A customer carrier running MPLS VPN wants to utilize a backbone carrier to forward traffic and exchange VPNv4 prefixes between the two customer carriers networks depicted. Which two sets of routers must establish MP-iBGP sessions? (Choose two.)
- A. CC-PE-A and CC-PE-B
- B. CC-PE-A and CC-P-A
- C. BB-PE-A and BB-P-A
- D. CC-PE-A and BB-PE-A
- E. BB-PE-A and BB-PE-B
- F. BB-PE-A and CC-PE-B
Answer: A,E
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/mp_ias_and_csc/configuration/12-2sx/mp-ias- and-csc-12-2sx-book/mp-carrier-bgp.html
NEW QUESTION 33
Which two are characteristics of using a non-MPLS peer-to-peer model over a traditional overlay model? (Choose two.)
- A. The configuration on a newly added site PE is updated automatically.
- B. Provider routers know the customer network topology.
- C. Routing information is exchanged between the customer router and one or a few PEs.
- D. The customer specifies the exact site-to-site traffic profile.
- E. The model is suited for nonredundant configurations.
Answer: B,C
Explanation:
Reference:
http://etutorials.org/Networking/MPLS+VPN+Architectures/Part+2+MPLS-based+Virtual+Private
+Networks/Chapter+7.+Virtual+Private+Network+VPN+Implementation+Options/Overlay+and+Peer-to-peer
+VPN+Model/
NEW QUESTION 34
Refer to the exhibit.
While provisioning a new BGP session between the PE and CE router, you issue the as- override command. Which statement describes modification of the prefix before being sent to the CE router (10.10.10.1)?
- A. The second and third autonomous systems change.
- B. The first AS changes, but no other autonomous systems change.
- C. The first and fourth autonomous systems change.
- D. The fourth AS changes, but no other autonomous systems change.
Answer: B
NEW QUESTION 35
You try to configure MPLS VPN VRF Selection based on a source IP address on an interface that has VRF configured, but you receive an error.
Which action must you take to correct the problem?
- A. Configure static routes for the VRF.
- B. Add the IP address to the VRF table.
- C. Change the source IP address.
- D. Remove the VRF from the interface.
Answer: D
Explanation:
Section: VPN Architecture
Explanation/Reference:
Reference: https://www.cisco.com/c/en/us/td/docs/ios/12_0s/feature/guide/vrfselec.html
NEW QUESTION 36
Refer to the exhibit.
A network engineer has been called to configure the four PE devices in order to enable full communication among the four CE devices connected to them. While starting to configure, he experienced a connectivity issue. Which two tasks should the engineer perform in order to begin the process correctly? (Choose two.)
- A. Configure PE4 to import route-targets 101:1 and 202:2.
- B. Configure PE2 to export route-targets 300:3 and 400:4.
- C. Configure PE3 to import route-targets 100:1 and 200:2.
- D. Configure PE3 to export route-targets 100:1 and 200:2.
- E. Configure PE1 to import route-targets 300:3 and 400:4.
Answer: C,D
NEW QUESTION 37
Refer to the exhibit. A network engineer has been called to configure the four PE devices in order to enable full communication among the four CE devices connected to them. While starting to configure, he experienced a connectivity issue.
Which two tasks should the engineer perform in order to begin the process correctly? (Choose two.)
- A. Configure PE4 to import route-targets 101:1 and 202:2.
- B. Configure PE2 to export route-targets 300:3 and 400:4.
- C. Configure PE3 to import route-targets 100:1 and 200:2.
- D. Configure PE3 to export route-targets 100:1 and 200:2.
- E. Configure PE1 to import route-targets 300:3 and 400:4.
Answer: C,D
NEW QUESTION 38
Refer to the exhibit.
PE1 and PE2 are exchanging VPNv4 routes for CE1 and CE2, and PE3 contains the default route to the internet. If the three devices are operating normally, which two conclusions describe this configuration?
(Choose two.)
- A. Only the CE2 VRF can access the default route provided by the Internet VRF.
- B. All three routers must be running MP-BGP.
- C. The CE1 and CE2 VRFs can exchange routes only between their respective VRFs on PE1 and PE2.
- D. All three routers must be running a distance-vector routing protocol.
- E. The CE1 and CE2 VRFs can access the default route provided by the Internet VRF.
Answer: B,C
NEW QUESTION 39
How does Layer 3 VPN traffic traverse an ISP network?
- A. Devices on the network use LSAs to share routes between P routers in the network.
- B. Devices on the network use MPLS labels to share VPN routes between P routers in the network.
- C. Devices on the network use GRE tunnels to move traffic between VRFs.
- D. Devices on the network use MPLS labels to move VPN traffic through the network.
Answer: D
NEW QUESTION 40
Refer to the exhibit. Which statement about this output is true?
- A. The adjacent LSR router configured mpls label range 0.
- B. The router IP 192.168.1.2 sent an implicit null, and the output is from the penultimate LSR.
- C. The adjacent router is the egress LSR and has mpls ldp explicit-null configured.
- D. The zero in the second column is the normal behavior of an egress router LSR.
Answer: C
NEW QUESTION 41
Refer to the exhibit.
Which statement describes the result of this configuration?
- A. R1 redistributes BGP routes into the OSPF process of VRF custabc as E1 routes.
- B. R1 redistributes BGP routes into the OSPF process of VRF custabc as E2 routes.
- C. R1 redistributes BGP routes into the OSPF process of VRF custabc as OIA routes.
- D. R1 mutually redistributes routes between BGP 65001 and the OSPF process of VRF custabc.
Answer: A
NEW QUESTION 42
Refer to the exhibit.
Which statement about this configuration is true?
- A. 192.168.1.2 must be reachable by all routers participating in the mvpn-intranet MVRF.
- B. Router 1 will accept multicast routes with a route-target of 12:1.
- C. Router 1 has statically defined thresholds for data MDT.
- D. The MVRF must be configured on each router on the customer and service provider networks.
Answer: B
NEW QUESTION 43
Which condition must be met before an environment can support CSC?
- A. The CSC-PE and CSC-CE must each be able to ping an interface in its respective global routing table.
- B. The CSC-CE must support OSPFv3.
- C. The CSC-PE and the CSC-CE must support IPv6.
- D. The CSC-PE and CSC-CE devices must be able to send labels to one another using BGP.
Answer: D
NEW QUESTION 44
While troubleshooting an AToM L2VPN service, a network consultant notices that the AC Layer 2 encapsulations are different. Which action should the consultant take in order to make the MPLS L2VPN work?
- A. interworking IP configuration on the last PE router before label disposition
- B. interworking IP configuration on both the AC terminations on the PEs
- C. tag-rewrite on the ingress and egress PE router
- D. nonrouted interworking setup to properly translate only the Layer 2 information from the AC
Answer: B
NEW QUESTION 45
......
Implementing Cisco Service Provider VPN Services (300-515 SPVI) Certification Path
Implementing Cisco Service Provider VPN Services (300-515 SPVI) exam is affiliated with the CCNP Service Provider and Cisco Accredited Professional-Service Provider VPN Services Implementation certifications. This is the official prerequisite for this exam. However, the course, Integrating VPN Services from Cisco Service Provider, allows applicants to prepare for this exam and is highly recommended.
Cisco 300-515 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
Pass CCNP Service Provider 300-515 Exam With 87 Questions: https://prepaway.testkingpass.com/300-515-testking-dumps.html